UBE DUO
Rail system made from high quality aluminum for concealed fastening of large-format cladding panels, e.g. made of fiber cement, aluminum composite material (ACM), high pressure laminate (HPL), ceramics or fine stoneware. Suitable for low construction depths and indoor applications.
The UBE DUO rail system has been designed for the mechanical concealed fastening with hanger clips reverse of the panels. At least two horizontal support rails are required for each cladding element, which must be fixed to the vertical rails using screws, bolts or rivets.
The cladding elements are suspended in places with hanger clips which are fixed and secured to the reverse of the cladding elements using special dowels or undercut rivets and anchors. Height adjustment is possible for cladding using a setting screw.
Material: EN AW-6063 T 66
SYSTEA system aluminum support rail
|
Support rail UBE DUO |
SYSTEA system aluminum hanger clips
|
Hanger clip UBE DUO type I |
Hanger clip UBE DUO type II |
Hanger clip UBE DUO type III |
KEIL anchor for UBE systems
|
Versions available for all common cladding materials |
To complete your system, you can obtain the appropriate KEIL anchor for your construction project directly from SYSTEA.
For detailed technical information see the KEIL Website
UBE DUO on HAPRO
UBE DUO on ALWI T3 with aluminum Flex bracket (AFH)
Advantages of UBE DUO aluminum rail system:
Energy efficiency:
- Any insulation depth possible
- Thermal bridge free construction possible
Highest aesthetics:
- Perpendicular alignment
- Stud-independent cladding design
Economic efficiency
- Easy to cut, drill and mount
- Less dead loads
Longevity:
- Corrosion free
Fire safety:
- Non-combustible
Flexibility:
- Suitable for low construction depths
- Suitable for interior wall applications