PROCO
Subframe system made from high quality aluminum for visible fastening of large-format cladding panels e.g. made of fiber cement, aluminum composite material (ACM) or high pressure laminate (HPL).
In conjunction with an additional system rail also suitable for fastening of terracotta/clay tiles.
The PROCO subframe system is comprised of vertical hat channels, vertical Z girts, connectors and horizontal T rails. The horizontal T rails are fastened through a sheathing or a rigid insulation to studs using screws. The connectors are fixed to the horizontal T rails using screws and can be used to compensate tolerances or to bridge additional insulation. Vertical hat channels and Z girts are fixed to the connectors.
The cladding is fixed visibly to the vertical hat channels and Z girts using screws or rivets.
Optionally, the vertical support profiles can be provided with sliding point perforations to accommodate possible linear expansions.
ⓘPROCO also serves as a carrier system for vertical terracotta/clay tile system rails.
SYSTEA system aluminum hat channels (Material: 6005A-T61) |
ASE 30/50/50/50/30-2.5 |
ASE 30/50/50/50/30-2.5 slotted (on request) |
SYSTEA system aluminum Z girts
|
40/50/30-2.5 |
40/50/30-2.5 slotted (on request) |
SYSTEA system ATB rails
|
ATB-R 76/50/2.5 |
ATB-R 76/127/2.5 |
SYSTEA system ATB connector
|
ATB-C 110/70/3-100 |
Advantages of PROCO aluminum subframe system:
Energy efficiency:
- Any insulation depth possible
Highest aesthetics:
- Perpendicular alignment
- Stud-independent cladding design
Economic efficiency
- Easy to cut, drill and mount
- Less dead loads
Longevity:
- Corrosion free
Fire safety:
- Non-combustible