HAPRO

Subframe system made of high-quality aluminum for visible fastening of large-format cladding panels, e.g. made of fiber cement, aluminum composite material (ACM) or high pressure laminate (HPL).
In conjunction with special rails or rail systems also suitable for visible fastening of terracotta/clay tiles and ceramics and for back-fastening of natural stone and several panel materials.

The HAPRO subframe system is comprised of vertical aluminum hat channels and Z girts. They are fastened through a sheathing or a rigid insulation to studs using screws.

The cladding is fastened visibly to the vertical rails using screws or rivets.

Optionally, the vertical support rails can be provided with sliding point perforations to accommodate possible linear expansions.

ⓘ

HAPRO also serves as a carrier system for horizontal terracotta/clay tile system rails or for the SYSTEA rail systems UBE DUO and NASTO-N.

SYSTEA system aluminum hat channels (Material: 6005A-T61)
30/15/100/15/30-2.5
44.7/25/34.6/25/44.7-2.5
44.7/25/34.6/25/44.7-2.5 slotted (on request)
ASE 30/50/50/50/30-2.5
ASE 30/50/50/50/30-2.5 slotted (on request)
25/25/30/25/25-2.5

SYSTEA system aluminum Z girts
25/25/30-2
25/25/30-2 slotted (on request)
40/50/30-2.5
40/50/30-2.5 slotted (on request)

Advantages of HAPRO aluminum subframe system:

Economic efficiency

Easy to cut, drill and mount
Less dead loads

Longevity:

Corrosion free

Fire safety:

Non-combustible

Get 3D-PDF here

Technical Drawings see here

For optional rail system UBE DUO see here
For optional rail system NASTO-N see here
For optional terracotta/clay tile system rails contact your cladding supplier